Skip to main content
- 1/4" probe fits into the smaller wells.
- 1/4" slim extruded polyethylene tape.
- Tape lengths: 30m or 100ft, 60m or 200ft, 100m or 300ft, 150m or 500ft.
- Static water level mode.
- PFAS Free Construction
- Available in 100 - 1500 feet or 30 - 450 meter lengths
- 5/8” (16mm) Water Level Probe (IP68) w/ holder
- Static and DrawDown operating modes.
- Electronic Panel with audio and visual signals (Fully Encapsulated to IP65)
- Sensitivity dial to tune out cascading water
- FREE Backpack Carrying Case w/ adjustable straps, laptop & notepad pouches
- Available in 50 - 2000 feet or 15 - 600 meter lengths.
- High tensile steel tape, jacketed with polyethylene, high break strength, stretch resistant.
- Static and DrawDown operating modes.
- Fully pressure/depth rated probes.
- Multi-Purpose: Measures water level elevation, bottom of a well, or the depth to the top of a bentonite layer or backfill sand.
- Available in 150m or 500ft length.
- Polyethylene, reinforced with Kevlar tape.
- 316 grade Plopper/Weight, 750 grams.
- Hydrocarbon resistant Kynar jacketed, high tensile steel core tape.
- Available in 15m - 150m or 50ft to 500 ft lengths.
- Static and DrawDown operating modes.
- Fully pressure/depth rated probes*
- Static water level measurements
- Temperature measurements 0°C to 50°C
- Conductivity measurements 0 to 80,000 µS
- High tensile steel, polyethylene jacketed, 30m - 300m or 100ft - 1000ft tape.
- Fully pressure/depth rated*, 22mm (0.875") field replaceable probe.
- Static water level measurements.
- Temperature measurements, -10°C to 80°C or -10°C to 110°C
- 30 m (100 ft) to 150 m (500 ft) lengths available.
