IAQ Industrial Hygiene Rental

• Sample for airborne particulates such as asbestos, ash, and mold.
• Sampling flow rate of 15 LPM.
• For use with Air-O-Cell and Via-Cell cassettes (not included).
• Rechargeable battery provides approx 8 hours of continuous run time.

• 1 - 5,000 cc/min adjustable flow rate
• Real-time clock with data-logging and software
• High-flow (450 to 5,000 cc/min) air sampling
• Low-flow (1 to 499 cc/min) air sampling
• Constant flow or constant pressure modes
• 8 hour minimum run time

• Flow ranges: 850-5000 cc/min; 5-500 cc/min (with low flow module).
• 6V 1.8 Ah rechargeable battery
• Personal sampling for dust, mold, asbestos and more (lab media not included).

• Test for moisture in timber/wood products, felt-roofing, plaster and brick.

• Provides continuous air flow measurements from 0.01 to 20 L/min.
• Typically used for calibrating air sampling pumps.
• NIST traceable.

• 1/30 HP motor, 12V DC Power (3 amps)
• Max flow: 0.64 CFM (18 L/min)
• Max vacuum: 18" Hg
• Max pressure: 15 PSIG

• 0 - 200.00 WC, 0 - 10.00 PSI, and 0 - 30.00 PSI models available.

• Measures relative humidity (0 - 100%), air velocity (0.6 - 60 m/s), and temperature (range depends on probe).

• 1/10 HP motor, 115V AC Power
• Max flow 1.5 CFM (42.5 L/min)
• Max vacuum: 20" Hg
• Max pressure: 10 PSI

• Accepts 1 or 2-liter sampling bags
• Rechargeable battery, 8 hour runtime
• Built-in rotameter valve for fill rate control
• Built-in pump, 0.1 - 6.5 L/min
• 22 in. Hg max vacuum
• Vacuum gauge in inches of mercury
• See-through window
• Sample inlet: 1/4" OD tubing

• Moisture detection within solids - sensor located in the bulge built into the top of the instrument.
• Hygrostick - measures relative humidity and ambient air temperature in rooms or materials.
• Surface Temperature Sensor - investigate condensation situations.
• Moisture Probe - obtain percent moisture content values in wood or wood moisture equivalent in non-conductive materials.
• Deep Wall Probes - obtain wood moisture equivalent values in solid structures such as walls and floors.

• Fully AARST-NRPP and NRSB certified radon detector for the US market.
• Radon measurement: 0 - 2700 pCi/L and 0 - 100 000 Bq/m3.
• Also measures temperature, relative humidity, and barometric pressure.
• Control the meter and view the data via mobile phone application.
• Stores up to 5 years of hourly data points.

• Measures carbon dioxide 0-50,000 ppm.
• Rechargeable Li-ion battery over 30 hours runtime
• Datalogging capability (3 month capacity at one-minute intervals

• Extensive range: 0.001 mg/m3 to 250 g/m3 (auto-ranging)
• Real-time graphical display of dust levels
• Simple icon driven user interface
• Unique removable sampling probe
• Rugged design for harsh environments
• Sample for total, respirable, PM2.5, or PM10 with optional adapter
• Unique on-site calibration insert

• Includes 964 Thermo Anemometer Probe: air velocity (0 - 50 m/s), temperature (14 to 140°F), relative humidity (0 - 95%).
• Built-in Manometer: -15 to +15 in. H2O differential pressure.
• Datalog 26,500+ samples and 100 test IDs, user configurable intervals from 1 second to 1 hour.
• Includes TrakPro Data Analysis Software for data download, organization, reports and graphs.
• Powered by 4 AA batteries or AC adapter.

• Particle counter with 6 programmable channel sizes between 0.3 μm to 10.0 μm (max measurable particle size is 25μm).
• Modes: differential (counts particles between channel sizes), cumulative (counts particles greater than each channel size), and concentration (ft3 or m3 concentration).
• Rechargeable Li-ion battery provides approx 7 hours of continuous use.
• 0.1 CFM (2.83 L/min) sampling rate.
• Datalog 10,000 sample records: includes date, time, six particle channels, flow, ID, and sample volume.

Disclaimer: The TSI AeroTrak is NOT intended for use when conducting total, respirable, PM2.5, or PM10 dust monitoring. Such use can damage the instrument. Please see the Casella CEL-712 Dust Monitor Rental for this application.

• Includes IAQ 982 Probe: relative humidity (0 - 95%), temperature (14 to 140°F), carbon monoxide (0 - 500 ppm), and carbon dioxide (0 - 5000 ppm).
• Datalog 26,500+ samples and 100 test IDs, user configurable intervals from 1 second to 1 hour.
• Includes TrakPro Data Analysis Software for data download, organization, reports and graphs.
• Powered by 4 AA batteries or AC adapter.