Enviro-Equipment

Our 10,000 ppm methane calibration gas is NIST traceable and includes a certificate. The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.

• 5 PPM Benzene (C6H6), 20.9% Oxygen (O2), Balance Nitrogen (N2).
• NIST traceable with certificate included.

Our 100 ppm methane calibration gas is NIST traceable and includes a certificate.  The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.

• Epoxy Phenolic interior lining
• 24.5" Diameter, 34.75" Height
• 2” bung in the center of the lid
• 2” bung centered 4 1/8” from bottom chime
• Body cover and bottom painted black

Our four gas calibration mixture consists of 50% LEL methane, 50 ppm carbon monoxide, 10 ppm hydrogen sulfide, and 18% oxygen.  The four gas calibration mixture is typically used for calibrating multi-gas meters for confined space entry.  It is NIST traceable and comes with a certificate.

1/2" x 3/4" Reinforced PVC Tubing

1" x 1.3" Reinforced PVC Tubing

Isopropyl Alcohol, Isopropanol (C3H8O)

Honda Compressor with 5HP Gasoline Engine, 20 Gallon Tank, Filter Frame, Hoses, Etc.

Soil Vapor Extraction Pilot System: Roots 22 with 3HP 1PH XP Motor on Skid, Vacuum and Pressure Relief Valves, Filter, Silencer, Sample Ports, 220V 1PH Start/Stop Switch w/ Cord

Ingersol Rand Compressor with 12HP Honda Electric Start Gasoline Engine, Air Tank, Filter Frame, Hoses, Etc.

SVE Pilot Unit: Rotron EN404 1HP 1PH Blower on small frame with Inlet filter, Vacuum Gauge, XP On/Off Switch with Cord Wired 115V

SVE Pilot Unit: Rotron EN656 3HP 1PH XP Blower on frame with Inlet Filter, Sample Port, Gauges, XP On/Off Switch with Cord Wired 230V

Travaini Oil Sealed Liquid Ring Vacuum system including 2HP 3PH XP motor, inlet filter, psi gauge, Hg gauge, temperature gauge, float switch, control panel; all skid mounted

Air Spage Blower Package with ROOTS URAI 53 Blower and 10HP 240/460V 3PH Motor, 3" Exhaust Silencer, 2.5" Inlet Filter, 0-15 PSIG Pressure Gauage, 1" Pressure Relief Valve, 2" Bleed Air Valve w/ Ball Valve, 460V 3PH Panel with HOA, Timer, Transformer, Hour Meter, Motor Starter, all skid mounted.

Hydrovane V04 Air Sparge / Bio Sparge Skid capable of 19.5 CFM @ 100 PSIG, including filters, pressure regulator with gauge, 4 zone manifold each with ball valve, flow meter, pressure gauge. 80 gallon receiver tank with electric auto drain. Start/Stop Control Station wired 230V 1PH with 20' power cable.

Air Sparge Blower Skid with Sutorbilt 2LP Blower, 3HP 3PH XP Motor, ACA-3241 Heat Exchanger with 1/4HP 3PH Motor, 5 Zone 1" Manifold with Solenoid Valves, 460V 3PH Control Panel All Mounted, Plumbed and Wired on Skid

Dual Phase Extraction Skid Including 75 CFM Dekker VMAX Vacuum Pump Model VMX0082 with 7.5HP 3PH Motor, Inlet Vacuum Air Filter, Vacuum Relief Valve, Brass Dilution Gate Valve with Filter Silencer, 80 Gallon KO Tank with SS Demister Pad, Sight Glass with LL HL HLA Level Float Tree, Moyno 34401 Transfer Pump with 1HP Motor, Gauges, 2” Steel Exhaust Stack, 230V 3PH Weatherproof UL508/698 Control Panel, Class 1 Div 2 Group D Skid Wiring, Skid Mounted with 4 Way Fork Lift Pockets