Enviro-Equipment

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

Air Sparge Blower Package with Roots URAI 36 Blower, 5HP 3PH Baldor Motor Mounted on Frame

Air Sparge system with 7.5HP 3PH XP motor, Roots 32 U-RAI blower, output silencer; all skid mounted

Air Sparge Blower Package with Tuthill 4007-21L2 Blower and Dayton 7.5HP 208-230/460V 3PH Motor on Skid

Air Spage Blower Package with Roots URAI 33 Blower and Baldor 7.5HP 230/460V 3PH Motor on Skid

Air Sparge system with 10HP 3PH XP motor, 3MP Sutorbilt blower, inlet/outlet silencers, inlet filter, psi gauge; all skid mounted

Air Sparge system with 7.5HP 3PH XP motor, Roots blower, Inlet filter, belt guard; all skid mounted

Excellent Condition, Quincy QT-15 Series Two Stage Reciprocating Air Compressor. Air Cooled. 51 cfm at 175 psi.  Belt driven by 15 hp XP Motor, 1760 rpm, 3/60, 230/460-volt, Baldor motor. 120-gallon capacity tank. Has new motor starter box mounted on base (not pictured).
 

Air Sparge System with Roots 42 U-RAI blower and 10HP 3PH XP motor, silencer; skid mounted

Soil Vapor Extraction Pilot System with Roots 22 Blower with 2HP 1PH XP Motor Mounted on Tank on Wheels with Vacuum Relief Valve, Air Filter, Exhaust Silencer, 220V 1PH XP Start/Stop Switch w/ Cord

Air Sparge system with 10HP 3PH XP motor, Roots 32 U-RAI blower, inlet filter, vacuum relief valve, output silencer, temperature gauge, XP control panel; all skid mounted

Travaini Oil Sealed Liquid Ring Vacuum system including 2HP 3PH XP motor, inlet filter, psi gauge, Hg gauge, temperature gauge, float switch, control panel; all skid mounted

Air Sparge system with 30HP 3PH XP motor, Roots 47 U-RAI blower, inlet filter, vacuum relief valve, outlet silencer, belt guard; all skid mounted

Air Sparge System with Roots U-RAI 53 blower and 10HP 3PH XP motor, silencer, relief valve, bleed air valve, control panel, inlet filter; skid mounted

Tuthill 551146L34282 Blower with 40HP 3PH Motor with relief valve, silencer, all mounted on skid.

Shallow Tray Model 1321P Poly Air Stripper, 2 Trays, Transfer Pump, Float Switches, Pressure Switch, Magnehelic Gauage, American Fan Blower; Skid Mounted

Carbonair SVE Skid with Rotron EN505 2HP 1PH XP Blower, Air Filter, Exhaust Silencer, KO Tank with HLA Float, Gauges, Vacuum Relief Valve, All Skid Mounted

Hydrovane V04 Air Sparge / Bio Sparge Skid capable of 19.5 CFM @ 100 PSIG, including filters, pressure regulator with gauge, 4 zone manifold each with ball valve, flow meter, pressure gauge. 80 gallon receiver tank with electric auto drain. Start/Stop Control Station wired 230V 1PH with 20' power cable.

Air Sparge Blower Skid with Sutorbilt 2LP Blower, 3HP 3PH XP Motor, ACA-3241 Heat Exchanger with 1/4HP 3PH Motor, 5 Zone 1" Manifold with Solenoid Valves, 460V 3PH Control Panel All Mounted, Plumbed and Wired on Skid

Air Sparge Blower Skid with Tuthill 2004-21L2 Blower, 3HP 3PH XP Motor, ACA-3241 Heat Exchanger with 1/4HP 3PH Motor, 5 Zone 1" Manifold with Solenoid Valves, 460V 3PH Control Panel All Mounted, Plumbed and Wired on Skid