Enviro-Equipment

Soil Vapor Extraction Pilot System with Roots 22 Blower with 2HP 1PH XP Motor Mounted on Tank on Wheels with Vacuum Relief Valve, Air Filter, Exhaust Silencer, 220V 1PH XP Start/Stop Switch w/ Cord

SVE Pilot Unit: Rotron EN656 3HP 1PH XP Blower on frame with Inlet Filter, Sample Port, Gauges, XP On/Off Switch with Cord Wired 230V

Soil Vapor Extraction Pilot System: Roots 22 with 3HP 1PH XP Motor on Skid, Vacuum and Pressure Relief Valves, Filter, Silencer, Sample Ports, 220V 1PH Start/Stop Switch w/ Cord

Roots 22 Blower Package for SVE Pilot Testing - Roots 22 Blower with 3HP 1PH XP Motor on Skid, Relief Valves, Filter, Silencer, Sample Ports, 220V 1PH Start/Stop Switch w/ Cord

SVE Pilot Unit: Rotron EN404 1HP 1PH Blower on small frame with Inlet filter, Vacuum Gauge, XP On/Off Switch with Cord Wired 115V

SVE Pilot Unit: Rotron EN404 1HP 1PH Blower on small frame with Inlet filter, Vacuum Gauge, XP On/Off Switch with Cord Wired 115V

SVE Pilot Unit: Rotron EN523M5L 3HP 1PH XP Blower on frame with Inlet Filter, Sample Port, Gauges, XP On/Off Switch with Cord Wired 230V

Ingersol Rand Compressor with 12HP Honda Electric Start Gasoline Engine, Air Tank, Filter Frame, Hoses, Etc.

Soil Vapor Extraction Skid with Sutorbilt 3MP Blower, Baldor 1.5HP 230V 1PH XP Motor, Solberg Particulate Filter, 0-30" Hg Gauge, 0-100" H2O Gauge, 230V 1PH XP Control Panel, All skid mounted

Travaini Oil Sealed Liquid Ring Vacuum system including 2HP 3PH XP motor, inlet filter, psi gauge, Hg gauge, temperature gauge, float switch, control panel; all skid mounted

Air Spage Blower Package with ROOTS URAI 53 Blower and 10HP 240/460V 3PH Motor, 3" Exhaust Silencer, 2.5" Inlet Filter, 0-15 PSIG Pressure Gauage, 1" Pressure Relief Valve, 2" Bleed Air Valve w/ Ball Valve, 460V 3PH Panel with HOA, Timer, Transformer, Hour Meter, Motor Starter, all skid mounted.

Hydrovane V04 Air Sparge / Bio Sparge Skid capable of 19.5 CFM @ 100 PSIG, including filters, pressure regulator with gauge, 4 zone manifold each with ball valve, flow meter, pressure gauge. 80 gallon receiver tank with electric auto drain. Start/Stop Control Station wired 230V 1PH with 20' power cable.

SVE Skid Soilvac with Roots URAI 36 Blower, 5HP 3PH XP Baldor Motor, Mounted on 80 Gallon KO Tank with XP High Level Float, Murphy XP High Temp Switch, 4 zone 2" manifold with vacuum gauges and ball valves, 480V 3PH XP Control Panel

Soil Vapor Extraction consisting of Rotron EN606 blower with 3HP 3PH XP Blower, inlet and outlet silencer, vacuum relief valve, sight glass with float switch, dilution valve, magnehelic gauge, temperature gauge, 208V 3PH XP Control Panel, all skid mounted

Soil Vapor Extraction consisting of Gast R6340R-50 Regenerative Blower with 4HP 3PH XP Blower, outlet silencer, vacuum relief valve, vacuum gauges, KO Tank with sight glass, demister pad/filter, KO Tank high level float switch, 230V 3PH XP disconnect and relay logic control panel, 3 leg SVE Manifold, all skid mounted

Air Spage Blower Package with Sutorbilt 6MP Blower and Marathon 30HP 230/460V 3PH Motor on Skid

Air Sparge Blower Skid with Sutorbilt 2LP Blower, 3HP 3PH XP Motor, ACA-3241 Heat Exchanger with 1/4HP 3PH Motor, 5 Zone 1" Manifold with Solenoid Valves, 460V 3PH Control Panel All Mounted, Plumbed and Wired on Skid

Air Sparge Blower Skid with Tuthill 2004-21L2 Blower, 3HP 3PH XP Motor, ACA-3241 Heat Exchanger with 1/4HP 3PH Motor, 5 Zone 1" Manifold with Solenoid Valves, 460V 3PH Control Panel All Mounted, Plumbed and Wired on Skid

Dual Phase Extraction Skid Including 75 CFM Dekker VMAX Vacuum Pump Model VMX0082 with 7.5HP 3PH Motor, Inlet Vacuum Air Filter, Vacuum Relief Valve, Brass Dilution Gate Valve with Filter Silencer, 80 Gallon KO Tank with SS Demister Pad, Sight Glass with LL HL HLA Level Float Tree, Moyno 34401 Transfer Pump with 1HP Motor, Gauges, 2” Steel Exhaust Stack, 230V 3PH Weatherproof UL508/698 Control Panel, Class 1 Div 2 Group D Skid Wiring, Skid Mounted with 4 Way Fork Lift Pockets

Soil Vapor Extraction Skid with Rotron EN909BG72WL 15HP 3PH XP Blower (615 CFM Max, 112" WC Max Vac), Solberg Inlet Vacuum Filter, Carbon Filtration Piping Loop, Discharge Silencer, KO Drum with Vacuum Relief Valve, XP High Level Float, Sight Glass, Dilution Valve, Manual Drain, 230V 3PH Relay Logic Control Panel with Sensaphone Sentinel 4G LTE Cellular Telemetry

• Permanently piped housings are opened without special tools
• 304 Stainless steel housings
• Covers are o-ring sealed
• Viton O-ring seals
• 150 psi rated housing
• Heavy-duty basket, over 50% open area
• Uses standard number 2, Bags
• Filter selection surface area is: 4.4 square feet
• 2 inch FNPT inlet and outlet
• 1/4 inch FNPT vent connection
• Adjustable stainless steel leg assembly

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.

The OSF-4, 10GPM, Gravity Drain, Oil Water Separator places a volume of corrugated Flopak coalescing media into the waste stream, the tank’s flow path brings the oils and solids bearing water to the influent end of the plate pack, it flows horizontally through the pack where oils then encounter the plate surface and are effectively separated from the water, the oil droplets roll up the plate surface begin to coalesce into larger droplets. Then, the larger droplets increased buoyancy pulls the oils away from the surface rising to the water surface. Solids perform the reverse and drop into the sludge hopper bottom.