Air Sparge plus Soil Vapor Extraction Systems
Home » Remediation Systems » Air Sparge plus Soil Vapor Extraction Remediation Systems
Air Sparge plus Soil Vapor Extraction Systems are used to apply pressure to an air sparge well to strip chlorinated solvent or petrochemical contamination from ground water and then remove it by applying a vacuum to nearby soil vapor extraction wells. The recovered contaminated vapors are treated and then discharged.
Enviro-Equipment, Inc. custom builds Air Sparge plus Soil Vapor Extraction systems to your specifications using new parts from quality manufacturers such as Rotron, Roots, Gardner Denver, Elmo Rietschle, American Industrial Heat Transfer, Solberg, Erdco, Gould's and Liberty Process. We also offer our own line of Knockout Tanks, Carbon Vessels and Control Panels.
Soil Vapor Extraction Systems typically include Vacuum Blowers, Knockout Tanks, Air Filters and Silencers, Blower Package Skids, Flow Meters, and Transfer Pumps. If the recovered contaminated vapors need to be treated, Soil Vapor Extraction systems may also include Vapor Phase Carbon Vessels. Air Sparge Systems typically include Air Compressors, Heat Exchangers and Flow Meters. Both the Air Sparge and Soil Vapor Extraction systems are controlled by a Control Panel. Air Sparge Plus Soil Vapor Extraction Systems can be mounted on skids, mounted on open trailers or mounted inside enclosed cargo containers, enclosed cargo trailers or in shed buildings.
Please contact us with your Soil Vapor Extraction System Specifications to recieve a competitive cost estimate at 866-655-8267 or e-mail us at remediation@enviroequipment.com.
Jump to Section:
Vacuum Blowers
|
Ametek Rotron Regenerative Blowers <<click for details
Heavy duty cast aluminum manifold, Spark resistant housing, cover, impeller, muffler tower and manifold are vacuum impregnated, Teflon lip seal in a stainless steel case standard for leakage containment to 5 cc/min or less, Explosion-proof motors standard and available in a variety of world voltages, All metal-to-metal surfaces are sealed with RTV sealant. |
| |
|
Dresser Roots URAI Blowers <<click for details
All Universal RAI® (URAI) series blowers are heavy duty rotary blowers in a compact, sturdy design engineered for continuous and maximum reliability. These blowers have grease lube on the drive-end with splash oil lube on the gear end. Roots’ exclusive figure-8” gearbox design improves oil distribution and lengthens bearing and gear life.
|
| |
|
Gardner Denver Sutorbilt Legend Series Blowers <<click for details
The Gardner Denver Sutorbilt Legend line of rotary positive displacement lobe blowers and vacuum pumps are the result of more than 75 years experience in the design, manufacture and support of superior industrial blower equipment. A Sutorbilt Legend is at the heart of an ever-expanding variety of air solutions working every minute of every day around the globe.
|
| |
|
Elmo Rietschle C-VLR Series Claw Vacuum Blower <<click for details
High efficiency, dry and contact-free compression claw vacuum blower with capacities ranging from 60 to 1140 m³/hr (35.3 to 671 cfm). The maximum ultimate vacuum at continuous operation is up to 50mbar (ABS). Low maintenance, integrated air cooling without additional cooling medium and suitable for multiple applications.
|
| |
Air Compressors
|
Elmo Rietschle C-DLR Series Claw Compressor <<click for details
High efficiency, dry and contact-free compression claw compressor with capacities ranging from 60 to 600 m³/hr (35.3 to 352.9 cfm). Pressure up to max. 2.2 bar at continuous operation. Low maintenance, integrated air cooling without additional cooling medium and suitable for multiple applications.
|
| |
|
Elmo Rietschle V-DTA Series Vane Compressor <<click for details
Dry running rotary vane compressors with bearings on both sides of the rotor. Capacities ranging from 52 to 151 m³/hr (30.6 to 88.8 cfm). Pressure up to 1.5 bar for continuous operation and up to 2.2 bar for intermittent operation. High efficiency and silent operation. Sound cover allows a ducted cooling air outlet either from one side only or from both sides. Easy servicing and operation.
|
| |
|
Gardner Denver EnduAir Screw Compressor <<click for details
Large Compressor Quality in a Small Package. The EndurAir Series 5-20hp rotary screw compressors are equipped with all of the components needed for a quality compressor: Advanced Airend for efficiency, low noise, and microprocessor control providing all necessary notifications to insure long-life. 15 to 84 cfm, 69 – 74 dBA, Base or Tank Mounted, Advanced AirPlus Controller.
|
| |
Heat Exchangers
|
American Industrial Heat Transfer Inc. Heat Exchangers <<click for details
The American Industrial ACA Series heat exchanger cools air with air, making it a simple inexpensive way to cool when compared to other water-cooled or refrigerant cooled systems. By using an ACA series air-cooled after cooler, machine tools will recieve cooler dryer air, provide longer trouble free life, experience less down time, and be cost effective to operate on a continuous basis. |
| |
Knockout Tanks
|
Enviro-Equipment Aluminum Air Water Separators <<click for details
Heavy Duty, Professionally Welded, Light-Weight Marine Grade Aluminum Construction, Sight Glass attached with unions for easy clean up. Clear PVC makes liquid levels easy to read. Float Tree installed in Sight Glass which includes High Level Alarm Float or LL, HL and HLA Floats for Transfer Pump operation. Tanks capable of handling full vacuum applications. Available in many different sizes, capacities and designs as well as custom designs. |
| |
Silencers
|
Solberg Absorptive Silencers <<click for details
Durable inline carbon steel construction with baked enamel finish, Layered sound absorbant media, Pressure drop graphs available upon request, Inlet or discharge applications with max temperature 212° F (100° C), Minimal pressure drop because it does not rely on internal baffles, tubes, or other restrictive devices, Reduces high frequency noise up to 30 decibels
(Due to the wide range of applications and machines these units are used on, please inquire for your specific application.) |
| |
Air Filters
|
Solberg Inlet Vacuum Air Filters <<click for details
99%+ removal efficiency std: Paper=2 micron, Polyester=5 micron, Filter change out differential: 10"-15" in. H2O above initial delta P, Positive sealing O-ring seal system, Rugged all steel construction with baked enamel finish,
Vacuum level: Typically 1x10-3 mmHg (1.3x10-3 mbar), Low pressure drop, Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
| |
|
Solberg Air Filter Elements <<click for details
99%+ removal efficiency std: Paper=2 micron, Polyester=5 micron, Filter change out differential: 10"-15" in. H2O above initial delta P, Dust loading capacity is increased 40 % - 50% with polyurethane prefilter, Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
|
| |
Blower Package Skid
|
Solberg BBF Series Blower Package Skid <<click for details
The Solberg BBF Series Blower Package Skid makes has an integrated discharge silencer that offers a low profile and small footprint. The compact design allows you to build significantly smaller and less costly enclosures to meet more stringent noise level requirements.
|
| |
Flow Meters
|
Erdco Flex-Flo 700 Series Flow Meters <<click for details
The 700 Series Flex-Flo™ meter is a simple and rugged flow rate indicator for air, water and other transparent fluids. It is particularly well adapted for applications that fall within standardized flow ranges at moderate pressures and temperatures. The 700 Series features a rugged cast aluminum housing with metal threaded connections, a full air tempered glass window and the ability to install the meter in horizontal (left to right) and vertical (up or down) flow orientations - all at an economical cost.
|
| |
|
Erdco Armor-Flo 3600 Series Flow Meters <<click for details
The 3600 Series Armor-Flo™ meter is a combination of signal transmission with independent mechanical local flow rate indication. Should your 24vdc loop go down, you will still be able to take flow rate readings at the meter. The output signal is linear within the middle 80% of the range and well suited for tracking utility applications. A response curve is furnished with each flowmeter.
|
| |
Transfer Pumps
|
Gould’s NPE Series Centrifugal Pumps <<click for details
Goulds NPE Series Centrifugal Pumps have complete AISI 316L stainless steel liquid handling components and mounting bracket for corrosion resistance, quality appearance, and improved strength and ductility. Enclosed impeller with unique floating seal ring design maintains maximum efficiencies over the life of the pump without adjustment. NPT threaded, centerline connections, easily accessible vent, prime and drain connections with stainless steel plugs. Optional seal face vent/flush available.
|
| |
|
Liberty Progressive Cavity Pumps <<click for details
The American APM Close Coupled Wobble Stator Pump Series from Liberty Process Equipment offers the best value available on the pump market for a progressive cavity pump for flows up to 53 GPM and pressures up to 150 psi. The simple design of the wobble Stator and just one universal joint give you the inherent advantages of a progressive cavity pump of low pulsation and shear, solids handling and viscous liquids at an affordable price.
|
| |
Vapor Phase Carbon Vessels
|
Enviro-Equipment Vapor Phase Carbon Vessels <<click for details
The VPCD series filters are carbon steel drums suited for low pressure low flow applications. Our VPCV-HPS series filters are carbon steel tanks suited for high pressure applications. Our VPCV-LPS series filters are carbon steel tanks suited for applications where pressure drop is a concern.
|
| |
Carbon Media
|
Granulated Activated Carbon Media <<click for details
Enviro-Equipment stocks and sells granulated activated carbon media. Media typically comes in 1,000 pound or 1,100 pound super sacks. We stock several different kinds of media such as mesh reactivated liquid phase coal, mesh virgin liquid phase coal, and mesh reactivated vapor phase coal. Other media types are available upon request.
|
| |
Electric Catalytic Oxidizers
|
Falmouth
FALCO 100 Electric Catalytic Oxidizer <<click for details
The FALCO 100 is a Factory Mutual approved electric catalytic oxidizer that treats air streams contaminated with volatile organic compounds. The catalyst provides VOC destruction efficiencies up to 99%. Startup is fully automatic. Controllers accurately regulate input loading and temperatures. This compact unit fits into small spaces. The FALCO 100 operates at a capacity of 40-120 CFM.
|
| |
|
Falmouth
FALCO 300 Electric Catalytic Oxidizer <<click for details
The FALCO 300 electric catalytic oxidizer treats air streams contaminated with volatile organic compounds. Startup is fully automatic. Controllers accurately regulate input loading and temperatures. At 600 ppmv (Gasoline) and 300 scfm, sufficient heat is recovered to preheat the inflow without supplementary electric energy. The FALCO 300 operates at a capacity of 100-350 CFM.
|
| |
|
Falmouth
FALCO 600 Electric Catalytic Oxidizer <<click for details
The FALCO 600 electric catalytic oxidizer treats air streams contaminated with volatile organic compounds. Startup is fully automatic. Controllers accurately regulate input loading and temperatures. At 850 ppmv (gasoline) and 600 scfm, sufficient heat is recovered to preheat the inflow without supplementary electric energy. The FALCO 300 operates at a capacity of 250-700 CFM.
|
| |
Control Panels
|
Enviro-Equipment Control Panels <<click for details
Enviro-Equipment, Inc is a UL508A and UL698A certified control panel shop. We build new control panels and refurbish used control panels. Types include weatherproof control panels, explosion proof control panels and UL Listed Panels. We build relay logic controls and programmable logic control (PLC) panels with remote telemetry.
|
| |
