Environmental Equipment & Supplies

- Optional
- Optional
- Optional
0.170" x 1/4" and 0.170" x 1/4" Bonded Poly Tubing

0.170" x 1/4" (air line) and 0.170" x 1/4" (water line) Bonded Polyethylene Tubing is designed specifically for use with submersible groundwater bladder pumps.  The tubing has two lines, the compressed air line that drives the pump and the water discharge line.  Bonded tubing helps with the process of lowering the bladder pump down-well, minimizing hang ups and kinks in the tubing as its lowered.

0.170" x 1/4" and 1/4" x 3/8" Bonded Poly Tubing

0.170" x 1/4" (air line) and 1/4" x 3/8" (water line) Bonded Polyethylene Tubing is designed specifically for use with submersible groundwater bladder pumps.  The tubing has two lines, the compressed air line that drives the pump and the water discharge line.  Bonded tubing helps with the process of lowering the bladder pump down-well, minimizing hang ups and kinks in the tubing as its lowered.

0.170" x 1/4" LDPE Tubing

0.170" x 1/4" Low Density Polyethylene Tubing is typically used as down-well peristaltic pump tubing.

0.170" x 1/4" Teflon FEP Tubing

0.170" x 1/4" Teflon® Fluorinated Ethylene Propylene (FEP) Tubing

pH 10 Buffer Solution

pH 10 Buffer solution for calibrating water quality instruments.

10 ppm Isobutylene (C4H8) Calibration Gas

Our 10 ppm isobutylene calibration gas is NIST traceable and includes a certificate.  The gas is typically used for calibrating photoionization detectors (PIDs).

100 µS/cm Conductivity Solution

100 µS/cm conductivity solution for calibrating water quality instruments.

100 ppm Isobutylene (C4H8) Calibration Gas

NIST traceable with certificate included, 100 parts per million (ppm) isobutylene calibration gas.

100 ppm Methane (CH4) Calibration Gas

Our 100 ppm methane calibration gas is NIST traceable and includes a certificate.  The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.

1000 µS/cm Conductivity Solution

1000 µS/cm conductivity solution for calibrating water quality instruments.

10,000 ppm Methane (CH4) Calibration Gas

Our 10,000 ppm methane calibration gas is NIST traceable and includes a certificate. The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.

1/2" x 5/8" HDPE Tubing

1/2" x 5/8" High Density Polyethylene Tubing is typically used with intertial pumps such as the Waterra Hydrolift 2.  The high density nature of the tubing minimizes stretching.

1/2" x 5/8" LDPE Tubing

1/2" x 5/8" Low Density Polyethylene Tubing is typically used with submersible groundwater pumps.

1/2" x 5/8" Teflon Lined Poly Tubing

1/2" x 5/8" Teflon® Lined (0.015" Liner) Polyethylene Tubing

12 Volt Battery Pack Rental

The 12 Volt Battery Pack Rental provides you with mobility in the field.

Starting at $10 Daily
12 Volt Deep Cycle Battery Rental

Enviro-Equipment offers 12 Volt Deep Cycle Marine Battery Rentals for use with groundwater sampling pumps.  These batteries are commonly used when a vehicle is not able to access the sampling area at the site.

NOTE: This item is not available for shipping! The order must be for local courier or pickup at our office.

Starting at $10 Daily
1/4" x 3/8" LDPE Tubing

1/4" x 3/8" Low Density Polyethylene Tubing

1/4" x 3/8" Teflon FEP Tubing

3/16" x 1/4" Teflon® Fluorinated Ethylene Propylene (FEP) Tubing

1/4" x 3/8" Teflon Lined Poly Tubing

1/4" x 3/8" Teflon® Lined (0.015" Liner) Polyethylene Tubing