Environmental Monitoring Equipment & Supplies • Sales, Rental & Service by Enviro-Equipment — Charlotte, North Carolina USA

  • Available in 100 - 1500 feet or 30 - 450 meter lengths.
  • White polyethylene tape, reinforced with Kevlar.
  • Static and DrawDown operating modes.
  • Fully pressure/depth rated probes*

The Heron Water Tape2, an economical water level meter, can be used for measuring both static and drawDown levels in open bodies of water, wells, boreholes and standpipes. This low cost unit with dual function capability is ideal for every project and budget.

The Water Tape2 manufactured with the white polyethylene tape, reinforced with Kevlar is available in both metric and engineering scale. Unlike some other white tape units, the water tape2 comes with a fully pressure rated probe* and carry bag.

  • Electronic Module (IP65) – change mode for static and drawDown levels, removable for easy cleaning and servicing. Circuits and components are potted to protect from moisture and dust intrusion
  • Sensitivity Switch – to adjust for false signals from cascading water
  • Link – to prevent damage to the tape, the probe is sacrificed at the link area if snagged in the well
  • Probe (IP68) – 5/8” fully pressure/depth rated*, no holes or recesses for contaminate build up
  • Tape – polyethylene, reinforced with Kevlar – markings in metric (mm) or engineering scale (1/100’)
  • Carry Bag – to protect your water level meter from the elements
  • Hanger – built in, to support the meter at the well head, allows for hands free deployment
  • Tape Guide – built in, to protect the tape from sharp edges on the well casing
  • Vinyl Holding Grip – molded to the frame, ergonomic easy grip
  • Winding Handle – custom made for easy rewinding with gloved hands

*Temporarily Submersible 

Reel Assembly

Standard

Large

Double

Height

36 cm (14.2")

50.5 cm (20")

50.75 cm (20")

Depth

21 cm (8.3")

27.6 cm (10.9")

51 cm (20.08")

Width

29 cm (11.4")

42 cm (16.5")

36.75 cm (14.5")

Weight (Reel Assembly Only)

2.30 kg (5.1 lbs)

4.56 kg (10.05 lbs)

7.08 kg (15.65 lbs)

Plate Size

26.67 cm (10.5")

30.48 cm (12")
40.64 cm (16")

30.48 cm (12")

Plate Material

Nylon

Aluminum

Aluminum

Brake

Ergonomic Dial

Hanger

Included on frame leg

Included on frame leg

No

Tape Guide

Included on frame leg

Included on frame leg

No

Test Points

On back of frame

On back of frame

Use Conductive Material

Tape Lengths

  • 30 m, 100 ft
  • 45 m, 150 ft
  • 60 m, 200 ft
  • 100 m, 300 ft
  • 150 m, 500 ft
  • 180 m, 600 ft
  • 200 m, 750 ft
  • 300 m, 1000 ft
  • 450 m, 1500 ft
  • 600 m, 2000 ft

Tape

Tape

Polyethylene

Jacketing

No

Conductors

7 strand (4 S/S & 3 copper)

Markings

Metric or Engineering Scale - Under Jacketing

Width

0.952 cm (3/8")

Dog Bone Profile

Yes

Break Strength

127 kg (280 lbs)

Probe

Weight

158 g (0.384 lb)

Length

248 mm (9.75")

Diameter

16 mm (0.625")

Removable

No

Depth Rating

IP68

Break Strain

68 kg (150 lbs)

Wetted Material

S/S, Viton, Nylon, ABS & Teflon

Electronic Panel

Operating Mode

Static & drawDown

Power Source

9 Volt alkaline

Sensitivity Control

S/S & Aluminum

Audio / Visual Indication

Ultra bright LED & 80 dBi buzzer

Rating

IP65

Removable

Yes

Maximum Temperature

80°C

AttachmentSize
Heron Water Tape 2 Manual840.26 KB