Instrument Sales

• Multi-Purpose: Measures water level elevation, bottom of a well, or the depth to the top of a bentonite layer or backfill sand.
• Available in 150m or 500ft length.
• Polyethylene, reinforced with Kevlar tape.
• 316 grade Plopper/Weight, 750 grams.

• Real-time graphical display of dust concentration from 0.001 mg/mg3 to 250 g/m3 (auto-ranging).
• PM10, PM2.5 and respirable dust measurement with optional accessories.
• Datalog 1 sec to 60 minute intervals, up to 86,000 data points (500 runs).
• Casella Insight Data Management Software for reporting and data download.
• Environmental enclosure available for boundary monitoring.

MODEL# PGM-7300

• Volatile Organic Compound (VOC) detection 0 - 5000 ppm.
• Built-in humidity compensation
• Built-in sampling pump draws up to 100' (30 m) away.

• Measures product layer as thin as 1 mm (1/200')
• Certified intrinsically safe to CSA and ANSI / UL Standards
• Fully pressure/depth rated, 19 mm (0.74") field replaceable probe.
• Available in 20m or 60' length.
• High tensile steel, jacketed with Kynar, high break strength, long lasting tape.

MODEL# PGM-2500, PGM-2560

• Provides monitoring of Oxygen (O2), Combustibles (LEL), and toxic gases.
• Toxic gas options include Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Sulfur Dioxide (SO2) and Hydrogen Cyanide (HCN).
• Available in Diffusion or Pumped version.
• Continuous datalogging (3 months for 4 sensors at 1-minute intervals, 24/7)
• Easy access to pump, sensors, filter and battery compartment.

• Single large noise measurement range, 20 to 140 dB.
• Broadband, octave and third octave frequency measurements.
• Meets IEC 61672 / 60651 and ANSI S1.4 Class 1 or Class 2.
• Large internal memory for datalogging.
• Statistical noise level measurement (Ln%) available.
• Audio recording and event triggering.

• Measures turbidity with a range of 0 to 1100 NTU.
• White Light Lamp conforms with USEPA Method 180.1
• Simple measurement and calibration

MODEL# PGM-1820

• Delivers results as a percentage of the lower explosive limit 0 - 100% LEL
• 55 built-in LEL correction factors
• Continuous datalogging

• Available in 50 - 1000 feet or 15 - 300 meter lengths.
• High tensile steel tape, jacketed with polyethylene, high break strength, stretch resistant.
• Static and DrawDown operating modes.
• Well Casing and Well Depth modes (requires purchase of probe accessories).
• Field replaceable, fully pressure/depth rated probes.

MODEL# PGM-7320

• PID measures from 0-15,000 ppm total volatile organic compounds (VOCs).
• Built-in humidity compensation for more accurate readings.
• Logs up to 6 months of data at 1-minute intervals.
• Correction factors for more than 200 compounds.
• Built-in sample pump can draw up to 100 feet (30m) horizontally or vertically.

• Static water level measurements.
• Temperature measurements, -10°C to 80°C or -10°C to 110°C
• 30 m (100 ft) to 150 m (500 ft) lengths available.

MODEL# PGM-6248

• Over 30 interchangeable sensor options, including gamma radiation and parts-per-billion (ppb) PID
• Intelligent sensors store calibration data, so they can be swapped in the field.
• Continuous datalogging (6 months for 5 sensors, 24/7).
• Large graphical display with intuitive icon-driven user interface.
• Built-in pump, 250 cc/min average

• Single large noise measurement range, 20 to 140 dB
• Broadband, octave and third octave frequency measurements.
• Meets IEC 61672 / 60651 and ANSI S1.4 Class 1 or Class 2.
• Large internal memory for datalogging.
• Statistical noise level measurement (Ln%) available.

• Measures turbidity with a range of 0 - 1100 NTU.
• Infrared LED Lamp (860nm) conforms with ISO 7027
• Simple measurement and calibration

MODEL# PGM-1800

• Measures Volatile Organic Compounds (VOCs)
• Industrial Hygiene Model: 0.1 to 2,000 ppm; 0.1 ppm resolution; datalogging
• Safety Model: 1 to 1,000 ppm; 1 ppm resolution; No datalogging
• Wireless or non-wireless versions available

• Hydrocarbon resistant Kynar jacketed, high tensile steel core tape.
• Available in 15m - 150m or 50ft to 500 ft lengths.
• Static and DrawDown operating modes.
• Fully pressure/depth rated probes*

• Sample from depths up to 33 feet (sea level) (max depth depends upon elevation, tubing and water density).
• 120 ml/min to approximately 3.5 L/min flow rates standard.
• Optional tubing adapter kit allows sample rate as low as 40 ml/min.
• Powered by 12 volt DC 3-5 amp max draw.
• Robust and water resistant metal case.
• Ideal for vacuum pumping and pressure delivery of liquids or gases

MODEL# PGM-7360

• Volatile Organic Compound (VOC) measurement 0 to 10,000 ppm (in VOC mode)
• Benzene and Butadiene measurement 0 to 200 ppm (in Tube mode with 9.8 eV Lamp)
• Built-in humidity sensor for accurate readings
• Integrated sampling pump 400 cc/min, sample from 100' away.

• Tape lengths: 15m or 30ft, 22m or 75ft, 30m or 100ft.
• Light weight and compact design
• Static and drawDown operating modes.
• 5/8" (16 mm) diameter probe for narrow piezometers.

MODEL# PGM-6228

• Over 30 interchangeable sensor options, including 0.1 to 5000 ppm PID
• Intelligent sensors store calibration data, so they can be swapped in the field.
• Continuous datalogging (6 months for 5 sensors, 24/7).
• Large graphical display with intuitive icon-driven user interface.
• Built-in pump, 250 cc/min average

• Simple operation for quick and easy sound measurements.
• Two selectable measurement ranges, 30-100 or 60-130 dB.
• Meets ANSI S1.4 and IEC 61672 class 2 (IEC 60651 where appropriate) standards.
• Easy to calibrate on site with 120 series field calibrator.
• Datalogging models available

• Measures turbidity with 3 user selectable ranges: 0 - 10 NTU; 0 - 100 NTU; 0 - 1000 NTU.
• Conforms with USEPA Method 180.1 for NTU measurement
• Rechargeable battery with 20 hours of use

• Probe options for high temperature, air flow and velocity, relative humidity, and more.
• Multi-function, simultaneously measures up to 6 parameters at a time (2 displayed on screen).
• Internal reading memory for up to 3,000 readings.
• Automatic mean value calculation and determination of the volume flow.
• PC software for analysis and archiving measurment values.

• 1/4" probe fits into the smaller wells.
• 1/4" slim extruded polyethylene tape.
• Tape lengths: 30m or 100ft, 60m or 200ft, 100m or 300ft, 150m or 500ft.
• Static water level mode.

• Datalogs water level and temperature readings.
• Titanium based PVD Coating
• Stores up to 120,000 data points
• Hastelloy pressure sensor
• Improved temperature compensation and response time