Instrument Rentals
- Ideal instrument for leak testing in any closed system that can be pressurized with a helium tracer gas.
- Measures helium and hydrogen from 25 ppm - 100% by volume.
- Low range resolution ± 25 ppm, high range resolution ± 0.2%.
- Humidity operation range between 10% RH to 50% RH.
- 8 Hours of use per charge.
- Bellows pump for use with DragerTubes (sold separately).
- DragerTubes are glass vials that contain a chemical reagent that reacts to a specific chemical or family of chemicals to provide a reading.
- 0 - 10.00 PSI and 0 - 30.00 PSI models available.
- Designed for finding buried or paved over valves, boxes, manhole covers, or any other concealed metallic object.
- Can also locate targets made of aluminum, brass and lead.
- Search through concrete and asphalt, fine tune for deeper searching and greater sensitivity.
- Locates Manhole Covers, Valves, Tees, and Risers
- Pinpoint centering of pipelines
- Trace pipe or cable using conductive mode
- GPS Accuracy: < 15 meters RMS, 95% typical
- WAAS Accuracy: < 3 meters, 95% typical with DGPS corrections
- Six Screens: Satellite, Map, Navigation, Altimeter, Trip Computer, Main Menu
We offer gas regulator rentals for customers who do not have a regulator for their gas canisters. Different flow rates and types of regulators are available depending upon your application.
- 1/10 HP motor, 115V AC Power
- Max flow 1.5 CFM (42.5 L/min)
- Max vacuum: 20" Hg
- Max pressure: 10 PSI
- Moisture detection within solids - sensor located in the bulge built into the top of the instrument.
- Hygrostick - measures relative humidity and ambient air temperature in rooms or materials.
- Surface Temperature Sensor - investigate condensation situations.
- Moisture Probe - obtain percent moisture content values in wood or wood moisture equivalent in non-conductive materials.
- Deep Wall Probes - obtain wood moisture equivalent values in solid structures such as walls and floors.
**NOTE: Calibration Kit Rentals are only available for PICKUP, gas must be purchased if the items need to be shipped.**
All of our gas monitor rentals are calibrated before they are sent to you. However, sometimes you are required to do your own calibrations in the field.
The GEM 2000+ Calibration Kit Rental is used to perform field calibrations on the GEM 2000 Plus meter.
Includes:
- Cal Gas: 35% carbon dioxide (CO2), 50% methane (CH4)
- Cal Gas: 4% oxygen (O2)
- Cal Gas: 10 ppm hydrogen sulfide (H2S), 50 ppm carbon monoxide (CO)
- Calibration Gas Regulator
An external charcoal filter may also be used in series with the external water filter and should be installed on the instrument side of the external water trap filter. The charcoal filter is used when known or suspected levels of H2S, hexane, propane, or other non-methane hydrocarbons exceeding one hundred ppm. Presence of these gases can affect the methane channel by indicating artificially high concentrations of methane. The charcoal filter needs to be condition with Calibration gas before use.
The GEM Temperature Probe can be hooked into the communcation socket to display temperature readings on gas reading screen. The temperature reading data can be recorded with all other data.
- Made for use with the Geotech bladder pumps.
- Allows you to sample from depths to 180 feet (55 m).
- Operates from a 12V DC car battery
- Sample from depths of 180 feet using the geocontrol PRO mini-compressor (separate rental)
- Powered by 12V DC battery.
- 1.66" and 0.85" diameter stainless steel pumps available.
- Teflon or Polyethylene bladders available (sold separately).
- 1 - 5,000 cc/min adjustable flow rate
- Real-time clock with data-logging and software
- High-flow (450 to 5,000 cc/min) air sampling
- Low-flow (1 to 499 cc/min) air sampling
- Constant flow or constant pressure modes
- 8 hour minimum run time
- Flow ranges: 850-5000 cc/min; 5-500 cc/min (with low flow module).
- 6V 1.8 Ah rechargeable battery
- Personal sampling for dust, mold, asbestos and more (lab media not included).
- 1-10 GPM (1/2" inlet/outlet) or 5-50 GPM (1" inlet/outlet) models available.
- Displays flow rate and cumulative flow.
A pump cooling shroud must be installed on the pump when using the pump in a larger than 2" diameter well casing. The cooling shroud isolates the screened suction interconnector and forces water to circulate past the pump motor. If using the pump cooling shroud in a larger than 2" monitoring well, be sure to install the shroud correctly. The set-screws should be anchored to the pump housing, not the screen. The screws are mainly intended to keep the shroud from sliding off the pump. If they are over-torqued, they will impede the rotation of the impellers and guide vanes and inhibit pump performance.
- Fits in 2" wells or larger (cooling shroud required for wells > 2")
- Maximum flow rate of 9 gallons per minute (GPM).
- 75-300ft motor length lead available.
- 3/8" or 1/2" barb fitting for tubing connection.
- Variable Frequency Drive (VFD) controller allows for fine tuning flow speed.
NOTICE: Rental rates do not include controller, see accessories area for controller pricing.
- Fits in 4" wells or larger.
- Maximum flow rate of roughly 20 gallons per minute (GPM).
- 100 feet motor lead length.
- Stainless steel and teflon construction.
- Variable Frequency Drive (VFD) controller allows for fine tuning flow speed.
NOTICE: Rental rates do not include controller, see accessories area for controller pricing.
- For use with Grundfos Redi-Flo 2 and Redi-Flo 4 pumps.
- Power requirement: 115V AC
- Variable Frequency Drive (VFD) controller allows for fine tuning flow speed.
- NaOH titrant and phenolpthalein indicator included for carbon dioxide titration.
- Measurement ranges: 10-50, 20-100, 100-400 and 200-1000 mg/L CO2
- Uses a precision dispensing device with compact cartridges to dispense titrants.
- Tests for ferrous iron between 0-10 mg/L.
- Includes 25 reagent powder pillows.
- Compare the reaction color to the color wheel to determine ferrous iron concentration.