Inlet Filters and Elements

FS Series: This series is the standard for inlet filtration and silencing, it is an integrated reactive design with multiple tubes.

  • 99%+ removal efficiency standard Polyester: 5 microns, Paper: 2 microns
  • Fully drawn weatherhood - no welds to rust or vibrate apart
  • Tubular silencing design - tube is positioned to maximize attenuation and air flow while minimizing pressure drop
  • Durable carbon steel construction with powder coated finish
  • Interchangeable elements
  • Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Typical noise attenuation up to 15 dB's (due to the wide range of applications and machines these units are used on, a single graph is insufficient. Please inquire for your specific requirement)
  • Pressure drop graphs available upon request
  • Low pressure drop center bracket and outlet pipe design

CSL Series: Designed for the inlet of vacuum pumps, these industrial vacuum filters have a "L" configuration and is rated for full flow and low pressure drop operation. The housings are vacuum tight for maximum equipment performance. Industrial, severe and extreme duty models are in stock. Find out more about stainless steel, epoxy coated and ATEX certified assemblies.

The ST and CT Series are compact inlet vacuum filters designed for easy element access. Captured particulate drops to the bottome bucket eliminating possible system contamination. The ST Series has a see-through bucket for easy visual inspections. The CT Series has a durable carbon steel bucket for harsh environments.

Polyester Filter Elements

  • Industrial Strength Replacement Polyester Media Elements
  • 99%+ removal efficiency to 5µm
  • Up to 6,600 SCFM (11,220 m3/hr)
  • More durable than paper media
  • Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Dust loading capacity is increased 40 % - 50% with prefilter

Paper Filter Elements

  • Industrial Strength Replacement Paper Media Elements
  • 99%+ removal efficiency to 2µm
  • Up to 4,705 SCFM (8,000 m3/hr)
  • Less expensive than polyester media
  • Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Dust loading capacity is increased 40 % - 50% with prefilter