Field Supplies
0.170" x 1/4" (air line) and 0.170" x 1/4" (water line) Bonded Polyethylene Tubing is designed specifically for use with submersible groundwater bladder pumps. The tubing has two lines, the compressed air line that drives the pump and the water discharge line. Bonded tubing helps with the process of lowering the bladder pump down-well, minimizing hang ups and kinks in the tubing as its lowered.
0.170" x 1/4" (air line) and 1/4" x 3/8" (water line) Bonded Polyethylene Tubing is designed specifically for use with submersible groundwater bladder pumps. The tubing has two lines, the compressed air line that drives the pump and the water discharge line. Bonded tubing helps with the process of lowering the bladder pump down-well, minimizing hang ups and kinks in the tubing as its lowered.
0.170" x 1/4" Low Density Polyethylene Tubing is typically used as down-well peristaltic pump tubing.
0.170" x 1/4" Teflon® Fluorinated Ethylene Propylene (FEP) Tubing
Our 10 ppm isobutylene calibration gas is NIST traceable and includes a certificate. The gas is typically used for calibrating photoionization detectors (PIDs).
100 µS/cm conductivity solution for calibrating water quality instruments.
NIST traceable with certificate included, 100 parts per million (ppm) isobutylene calibration gas.
Our 100 ppm methane calibration gas is NIST traceable and includes a certificate. The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.
1000 µS/cm conductivity solution for calibrating water quality instruments.
Our 10,000 ppm methane calibration gas is NIST traceable and includes a certificate. The gas is typically used for calibrating flame ionization detectors (FIDs) and other volatile organic compound detectors.
1/2" x 5/8" High Density Polyethylene Tubing is typically used with intertial pumps such as the Waterra Hydrolift 2. The high density nature of the tubing minimizes stretching.
1/2" x 5/8" Low Density Polyethylene Tubing is typically used with submersible groundwater pumps.
1/2" x 5/8" Teflon® Lined (0.015" Liner) Polyethylene Tubing
3/16" x 1/4" Teflon® Fluorinated Ethylene Propylene (FEP) Tubing
1/4" x 3/8" Teflon® Lined (0.015" Liner) Polyethylene Tubing
Our landfill gas meter calibration gas consists of 15% methane (CH4) and 15% carbon dioxide (CO2). The calibration gas is typically used for calibrating landfill gas meters such as the Landtec GEM 2000 and GEM 5000. The calibration gas is NIST traceable and comes with a certificate.
1/8" x 1/4" Low Density Polyethylene Tubing is typically used as down-well peristaltic pump tubing.
