Casella dBdage2 Personal Noise Dosimeter Kit Rental
- Instrinsically Safe
- Bluetooth® Connectivity
- Measures all noise dose parameters simultaneously
- Long battery life
- Compliant with ANSI S1.25 - 1991 (R2007)
The dBadge2 simultaneously records and computes all noise data for every measurement run. The comprehensive set of data containing all of the below parameters is available to view and analyse within the Casella Insight PC application or using the download utility. The Dosimeter Set-ups D1, D2 and D3 define which parameters are displayed on the instrument itself but all values are automatically stored in the memory of the dBadge2 for download.
|TWA (8 hr)||Projected TWA 8 hr|
|Dose %||Proj Dose %|
|LEPd / LEX, 8 hr||Proj LEPd/LEX, 8h|
|LAPk + Time||LCPk + Time||LZPk + Time|
|ISO Dose% (using ISO Criterion level)|
|ISO Proj Dose% (using ISO Criterion level)|
|Projected Exposure Points (using ISO Criterion level)|
|Exposure Points (using ISO Criterion level)|
|Exceedance time (LAS > Exceedance level)|
|LCpk >135 (count)||LCpk >137 (count)||LCpk >140 (count)|
|LAFmx + Time||LAFmin + Time|
|LASmx + Time||LASmin + Time|
|LAImx + Time||LAImin + Time|
|Cumulative Motion Index (expressed as % motion detected during a measurement run).|
Monitor your dBadge2 remotely with the supporting Airwave App on your mobile device. There’s no need to disturb the wearer when you can view the status or even start, stop or pause the measurement run.
Intrinsically Safe versions of the dBadge2 personal noise dosimeter are available. The dBadge2 personal noise dosimeter has been designed specifically to be used in potentially explosive area in the oil and gas, petrochemical and pharmaceutical industries.
Multiple Simulated Dosimeters
The dBadge2 personal noise dosimeter has a ‘multiple simulated dosimeter’ capability to display noise exposure results according to differing regional or international protocols. These simulated dosimeters simply define the measurement parameters displayed on screen and includes ISO, OSHA, MSHA and ACGIH set-ups.
The dBadge2™ personal noise dosimeter takes full advantage of the OLED display by color coding screens, status and alarms. This aids data interpretation in the field, giving a strong visual indicator when trigger levels have been exceeded.
The built in motion sensor expresses a worker’s movement as a percentage of the time that motion has been detected during a measurement run. This means that you can be confident that the dBadge2™ personal noise dosimeter has been worn for the entire shift.
Combined Docking Station and Charger
When placed in any of the 3 pockets, the dBadge2™ personal noise dosimeter will begin to charge, progress being displayed on the screen of the meter. The first pocket has a USB symbol and when placed in there, an individual dBadge2™ can download data, either via a Download Utility directly into Excel or via the Insight Data Management Software specialist dBadge2™ plugin.
|Standards||ANSI S1.25:1991 R2007, IEC 61252 Ed 1.1 (2002-3)|
|Linear Operating Range:||55.0-140.3 dB (A) RMS|
|Peak Measurement Range:||90.0-143.3dB (C or Z weighted),|
|Sound Exposure Range:||0.0- 6,100.0 Pa2Hours|
|Frequency Weightings:||A, C and Z, Type 2|
|Time Weightings:||Fast, Slow and Impulse|
|Exchange Rate:||Q=3 or Q=5dB exchange rates|
|Threshold and Criterion:||70-90dB in 1dB steps|
|Operating Temperature Range:||
|Ambient Pressure Range:||< ±0.5dB over 85 - 112kPa|
|Humidity Range:||< ± 0.5dB over 30% - 90% (non-condensing)|
|Storage Temperature Range:||-10°C to +50°C|
|Battery:||Internal NiMH, 800mAH|
|Run Time:||Typically 35 hours using Broadband Mode|
|Charge Time:||< 6 Hours from fully discharged|
|Maximum Run Duration:||24 Hours|
|Maximum Number of Runs:||100|
|Storage Capacity:||Internal USD Flash memory - 300 hours of run data (including 1 second profile data) and up to 90 minutes of event audio recording.|
|PC Interface:||USB 2.0 Full Speed 12 Mbps via Docking Station|
|Dimensions:||85 L x 54 W x 55 H (mm)|
|Environmental I.P. Rating:||IP65 (with permeable air vent)|