|
|
|
|
|
Length |
Daily |
Weekly |
Monthly |
75-100 ft |
$145.00 |
$340.00 |
$1090.00 |
150-200 ft |
$165.00 |
$360.00 |
$1120.00 |
300 ft |
$185.00 |
$390.00 |
$1190.00 |
|
|
|
|
Length |
Daily |
Weekly |
Monthly |
75-100 ft |
$75.00 |
$190.00 |
$540.00 |
150-200 ft |
$95.00 |
$210.00 |
$570.00 |
300 ft |
$115.00 |
$240.00 |
$640.00 |
|
The Grundfos Redi-Flo 2 is a variable speed submersible groundwater pump used for purging and sampling groundwater in 2-inch wells or larger (cooling shroud required for wells larger than 2-inches). The Redi-Flo 2 pump is constructed out of stainless steel and teflon. The redi-flo 2 controller can be powered by by either 115V or 230V AC power. The default set-up for rental units is 115V AC.
|
Redi-Flo 2 Pump Curve:
Downloads:
| Redi-flo 2 Specifications: |
| |
| ELECTRIC |
| Full Load Rating |
.5 HP / 220V / 3 PH / 400Hz / 5.5A |
| Maximum Current (SFA) |
5.5 amps |
| Motor Protection |
Thermal overload - Thermik Geratebau, Series SY6 - (176°F [80°C])
Current Overload - Incorporated into Redi-Flo VFD (9.0A for 10 seconds) |
| |
| PIPING CONNECTION |
| Discharge Port |
1/2" Female NPT ( 3/8" and 1/2" Hose Barb
Adaptors Available ) |
| |
| OPERATING CONDITIONS |
| Minimum Ambient Fluid Temperature |
34°F (1°C) |
| Maximum Ambient Fluid Temperature |
80°F (28°C) |
| |
| MOTOR FLUID |
| Motor Lubricating Fluid |
Deionized (DI) Water |
| |
| STORAGE CONDITIONS |
| Minimum Ambient Temperature |
34°F (1°C) |
| Maximum Ambient Temperature |
120°F (50°C) |
| |
DIMENSIONS AND WEIGHT
(PUMP AND MOTOR) |
| Dimensions |
11.3" length x 1.81" diameter |
| Net Weight |
5.5 lbs., excluding motor lead |
| |
| LEAD LENGTHS |
| Various lengths available from 100' to 300'. |
|
Redi-Flo Variable Frequency Drive (Controller) Specifications
