Environmental Monitoring Equipment & Supplies • Sales, Rental & Service by Enviro-Equipment — Charlotte, North Carolina   USA

 

Landtec GEM-2000 Landfill Gas Monitor Rental


Home » Equipment Rentals » Gas Meter Rentals » Landtec Gem 2000 Landfill Gas Monitor
Landtec Gem 2000 Landfill Gas Monitor
Daily
Weekly
Monthly
$165.00
$495.00
$1,275.00


GEM-500 & GA-90 Capabilities Combined

The GEM 2000 was designed by CES-LANDTEC specifically for use on landfills to monitor landfill gas (LFG) extraction systems, flares, and migration control systems.  The GEM 2000 combines the GEM 500 and the GA-90 into one faster, more accurate, intrinsically safe instrument.

The GEM 2000 samples and analyzes the methane, carbon dioxide and oxygen content of landfill gas.  The easy-to-read LCD screen shows the results as percentages of CH4, CO2, O2 and "balance" gas.  The GEM 2000 calculates and displays gas flow rate. 

It also measure and displays Btu content, temperature (w/optional probe), relative and atmospheric pressures and CH4 LEL (Lower Explosive Limit).

Rental Includes:

- GEM 2000
- Water Trap Filter w/ Tubing
- Data Download Cable
- Battery Charger
- 10ft PVC Tubing
- Software
- Hard Case
- EEI Calibration Record
- Spare Filters
- Carrying Case w/ Strap
- Factory Calibration Certificate
- Instruction Manual

Diverse Field Applications

monitors migration control systems, gas extraction systems, flares, migration probes, and more.

Gas Extraction Monitor Mode

provides automatic sampling and analysis of gas composition % by volume CH4, CO2, O2 and % balance gas, % CH4LEL, temperature (with optional probe), static pressure, differential pressure, and barometric pressure.  Also calculates gas flow rates (SCFM) as well as Btu rates.

Landfill Gas Analyzer Mode

provides automatic sampling and analysis of gas composition % by volume CH4, CO2, O2 and % balance gas, % CH4LEL, temperature (with optional probe), barometric pressure and relative pressure.  Can be used for data logging, with user programmed intervals.

Easy To Read Display

extra large backlit LCD shows up to five gases, atmospheric and gas vacuum pressure, temperature, ID code-all at the same time.

Intrinsically Safe

essential for protecting personnel who work with explosive and hazardous landfill gas.

On Site Calibration

rapid calibration checking or adjustment can be carried out on site.

Automatic Purge

automatically purges analyzer with clean air when a new ID is selected. (This feature can be turned off).

Light Weight Compact Size

easy to carry.  Weighs less than five pounds.

Quick Analysis

completes sampling and displays gas analysis and flow results in less than one minute.

Infrared Gas Analyzer

provides accurate measurements of methane (CH4) and carbon dioxide (CO2).

Gas Temperature

read when using optional temperature probe or can be entered manually.

Durable Oxygen Sensor

provided by the galvanic cell principle, not influenced by other gases (i.e. CH4, CO2 or H2S)

User Friendly On

Screen Menu-in each mode the user performs most operations in just two screens.

PC Data Downloading

provided by RS232 interface with Data Field software (Release 3.0 or later).

Data Storage/Retrieval

stores prior measurements take for each monitoring point, 900 monitoring points total.

Date/Time Stamp

recorded for all stored data.

Prior Data Recall

allows user to view prior data for each monitoring point.

Methane Analysis

displayed as either % CH4 by volume or CH4LEL (Landfill Gas Analyzer Mode Only).

Durable Construction

Built strong, durable plastic material suitable for harsh landfill environments.

All Weather Use

designed to operate in extremes from 32F to 104F.  Sealed, weather-tight case.

Built-in Adjustable Alarms

allows user to set alarm limits for CH4 and O2.

Rechargeable Batteries

internal, rechargeable nickel metal hydride batters are standard.

Operating Time

approximately 8 hours with normal pump usage (approximately 10 hours without pump running.)

Fast Recharge Time

approximately 2 hours from complete discharge.

Battery Check

battery life is continuously displayed.

Monitoring Point ID Codes

provides alphanumeric identification of monitoring points for data storage and recall.

ID Comments

allows user to answer up to 3 questions with a list of 9 potential answers each.

Imperial vs. SI Units

can display measurements in Imperial (USA) or SI (metric) units.

Interfaces to CES-LANDTEC

Data Field software, which provides statistical management and reporting of LFG data.

Multiple Flow Meter Analysis

calculates gas flow with Accu-Flo wellheads, orifice plates and pitot tubes.

Subsurface Migration Probes

Gas Extraction Wells

Flare Monitoring

Landfills

Sensor Range
Methane
0 - 100%
Carbon Dioxide
0 - 100%
Oxygen
0 - 25%
Detection Principle - CO2 and CH4 by dual wavelength infrared cell with reference channel.
- O2 by internal electrochemical cell.
Typical Accuracy 0 to Full Scale
Gas

0-5% volume

5-15% volume 15% - Full Scale
CH4 ± 0.3% ± 1% ± 3%
CO2 ± 0.3% ± 1% ± 3%
O2 ± 1% ± 1% ± 1%
Pump Specifications
Pump Flow Rate 300 cc/min nominal flow
Vacuum up to 70" WC
UL Certified to Class 1, Zone 1, AEx ib lla T4
Power Supply
Battery Type Rechargeable Nickel Metal Hydride battery pack containing six 4AH cells. Not user replaceable. Lithium Manganese battery for data retention.
Battery life Typical use 10 hours from fully charged condition.
Battery charger Separate intelligent 2A battery charger powered from AC voltage supply (110-230V).
Charge time Approximately 2 hours from complete discharge.
Battery lifetime Up to 1,000 charge/discharge cycles.
Title
Description
Download
Landtec GEM 2000 User Manual
Operator's Manual
PDF Icon
GEM Calibration Kit*
50% CH4, 35% CO2, 4% O2
Calibration Kit
Daily
Weekly
Monthly
$20.00
$60.00
$180.00
Charcoal Filter Adapter
GEM Charcoal Filter
Daily
Weekly
Monthly
$5.00
$15.00
$45.00
Temperature Probe
GEM Temperature Probe
Daily
Weekly
Monthly
$5.00
$15.00
$45.00
*NOTE: All Organic Vapor Analyzers (PID, FID, TLV Sniffer) and Gas Meters are calibrated prior to each rental. If you wish to purchase calibration gas, please call for pricing. Also, we no longer ship calibration kits for rental since the return shipper must be a certified hazardous materials shipper. Rental rates are based on 25% calibration gas usage per week (based on tank pressure). Overages will be billed in 25% increments in addition to the rental rate.
New Account Setup

Locations & Contact Information
Specials || Used Equipment
Rental Options &
Delivery Details
Service/Repair & Maint.
Ask The Expert! || Blog
Sign Up For Our Newsletter!
Why Buy From Us?
Frequently Asked Questions

check out our Facebook
follow us on Twitter
see our videos on YouTube

Share This Website!

Click to Return to MAIN Home Page
Click to Return to MAIN Home Page
Click to Return to MAIN Home Page
Click to Return to MAIN Home Page
home || about us || products - general: rentalsales || products - remediation: rentalsalesused || services || order form || contact information || site map
© 2002-2012 — All Rights Reserved — Enviro-Equipment, Inc — Environmental Equipment & Supplies: Rental, Sales, Service & Repair