Environmental Monitoring Equipment & Supplies • Sales, Rental & Service by Enviro-Equipment — Charlotte, North Carolina USA

  • Moisture detection within solids - sensor located in the bulge built into the top of the instrument.
  • Hygrostick - measures relative humidity and ambient air temperature in rooms or materials.
  • Surface Temperature Sensor - investigate condensation situations.
  • Moisture Probe - obtain percent moisture content values in wood or wood moisture equivalent in non-conductive materials.
  • Deep Wall Probes - obtain wood moisture equivalent values in solid structures such as walls and floors.
Title Daily Rate Weekly Rate Monthly Rate
GE Protimeter Moisture Detection Meter Rental $55.00 $175.00 $525.00

The Complete Moisture Measurement and Diagnosis System For Moisture Detection in Building Environments. The Protimeter Moisture Measurement System (MMS) Plus is a complete moisture measurement device for use in many different building related industries. The MMS combines pin type and non-invasive modes of measurement together with a thermo-hygrometer in one state-of-the-art instrument.

The instrument is compact and simple to use, having a large liquid crystal display and a cluster of just four buttons for selecting the operational modes. It is supplied in a nylon carry case with zipper together with the necessary accessories for a complete moisture survey.

When used as a moisture meter, the MMS Plus has two operational modes known as Search and Measure. By selecting Search mode and holding the instrument against building materials such as walls, the user obtains a qualitative indication of the moisture level beneath the surface or under a floor covering. By selecting Measure mode and using the standard pin or 5" deep wall probes to gather further information at the surface and up to 5" in depth below the surface.

Quick measurements of relative humidity, dew point, mixing ratio (grains per pound/parts per million by weight) and ambient temperature are shown at the touch of a button. Surface temperature measurements can also be measured with the standard supplied surface temperature sensor (BLD5804) making this instrument especially suitable for condensation risk assessment and diagnosis.

Items Included:
  • GE Protimeter
  • Moisture Probe
  • Spare Probe Needles
  • Auxillary Moisure Probes
  • Hygrometer
  • Surface Thermometer
  • RS232 Data Cable
  • Protimeter Software
  • Calibration Checker
  • User Manual
  • Extension Adapter
  • Carrying Case
  • Spare Batteries

Power

2 x AA Batteries

Protimeter Dimensions

10.58 oz (300 g)
7 in. x 2.75 in. x 1.9 in. (180 mm x 70 mm x 49 mm)

Hygrostick Probe

2 in. long x 0.3 in. (50 mm long x 8 mm)

Humistick Probe

2.5 in. long x 0.5 in. (65 mm long x 12 mm)

Search Mode

0-1000 relative scale, nominal depth of measurement 0.6 in. (15 mm), tolerance ±10 relative scale

Measure Mode

8-29 %WME, 30-100 relative scale in saturated material

Hygrostick Measurement

30-100 %rh, 32 to 122°F (-10 to 50°C)

Hygrostick Tolerance

30 -40 %rh, ±3 %rh @68°F (20°C)
41-98 %rh, ±2 %rh @68°F (20°C)
32 to 122°F (-10 to 50°C), ±0.6°F (±0.3°C)

Humistick Measurement

0-100 %rh, 32 to 122°F (-10 to 50°C)

Humistick Tolerance

0-10 %rh, ±3 %rh @68-86°F (20-30°C)
10-90 %rh, ±2 %rh @68-86°F (20-30°C)
90-100 %rh, ±3 %rh @68-86°F (20-30°C)
32 to 122°F (-10 to 50°C), ±0.6°F (±0.3°C)

Surface Temperature Sensor

32 to 122°F (-10 to 50°C), ±0.6°F (±0.3°C)