Casella Apex Personal Sampling Pumps and Accessories

home » rentals: environmental equipment » Casella Apex Personal Sampling Pumps and Accessories

Rent This Product

• Apex pump and infra red link
• no need for cable to connect pump to computer
• simply line up the IR ports on the adapter and the pump in line of sight about 2 to 3 ft apart and the Casella software takes control of the communications automatically
• all completed runs in the pump are transferred to the computer
• use the IR link adapter to send setup configurations to an Apex pro version pump
• IR link and the software are included with all Apex pro 5 pack kits
• optional with smaller

Part # 182091A IR link and Pump Manager software

• Apex pump and typical accessory kit
• pumps available as single instruments with alkaline emergency battery pack
• pumps available as single instruments with NiMH battery pack and charger unit
• 5 pack Apex pump kits available with 5 way charger in large tool kit case
• 5 pack of Apex pro pump includes IR link adapter and Pump manager software

• single kit case for Apex pumps
• standard with the Apex pro pumps
• optional with the Apex Standard pumps
• holds the pump plus charger plus power supply

Part # P107104S single kit case

• 5 pack kit case for multiple pumps
• space for 5 single chargers or 1 x 5 way universal voltage charger
• space for spare cassettes and tubing

Part # P104107 5 pack kit case for pumps

• Apex pump and drop in charger
• charger is powered from universal 12 Vdc plug top transformer
• just drop pump into charger and charging will begin
• front panel light shows red when charging
• light changes to green when battery pack fully charged (about 3 hours for regular non IS pumps)
• keeps battery pack at full capacity by trickle charging
• charger will not try and charge alkaline battery pack if fitted in pump

Part # 182052B drop-in charger

• Apex pump showing top of case with inlet port at left
• IR download and setup window at the front
• outlet port for gasbag at the right
• inlet and outlet ports have standard 5 mm outside diameter to use with wide variety of hoses

Part # 182063B Apex pro

• Apex pump and grab bag for gas sampling
• set pump to 0.8 L/m flow rate and it goes into gas bag mode automatically
• bag begins to fill when pump started
• automatic switch off when pump detects that bag is full
• no danger of overfilling or bag bursting
• seal bag and remove from outlet when finished

Part # 182000B Apex standard

• Apex pump and low flow adapter
• set flow rate to 1.5 L/m and use screw adjuster on constant pressure control to set desired flow rate
• requires external flow rate device such as rotameter to verify pump flow

Part # P109032 Low flow adapter

• HazVac air sampling unit
• uses a modified Apex pump to collect vapor and gas samples to check for possible contamination
• simple, single push button operation
• vapor collected in a 3 liter Tedlar bag for later analysis
• case can be hosed down or washed after collection in unknown area

Click Here to View the Manual

Part # 176150D Apex HazVac