Proactive Environmental 12VDC Stainless Steel Mega-Monsoon Pump Rental

Rent This Product
Daily	Weekly	Monthly
$140.00	$345.00	$1085.00

Enviro-Equipment rents the Proactive Stainless Steel Mega-Monsoon Pump used for purging, sampling, and low flow sampling of groundwater - Call us at 888.274.8929

Proactive Environmental Products is proud to engineer the 12-volt Stainless Steel Mega-Monsoon Pump and Low Flow with Power Booster III LCD Controller for low flow purging and sampling of groundwater monitoring wells. The ruggedly constructed, yet compact, all Stainless Steel Mega-Monsoon Pump is capable of pumping from a depth of 200 feet.

Did you know Proactive's pumps can be used for low flow sampling?

Simplify and Expedite Your Next Sampling Event!

• Runs off of a 12-volt car battery or one of Proactive's Mobile Battery Power Paks!
• Perform low flow sampling as low as 10 ml per minute, from any depth, using the Low Flow with Power Booster III LCD Controller!
• Digital controller display allows you to fine tune the pump flow rate!
• Computer engineered bottom debris filter screen minimizes the passing of sand, small rocks, and debris reducing clogging or damage to the motor!
• Long-lasting, high performance pump motor lasts over 500 hours under normal conditions!
• User replaceable motor module!
• Smooth contour minimizes well hang-ups!
• Simple to decontaminate and repair!

     Stainless Steel Mega-Monsoon "60 Second Change Out Motor Design" - A Great Value and No Down Time!

1 . The replaceable motor module
2. The motor housing top connector
3. The outside pump housing
The Stainless Steel Mega-Monsoon Pump is only 1.82" OD and is constructed of three major components: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing This modular design allows for field replacement of the motor module in less than 60 seconds. Each Stainless Steel Mega-Monsoon Pump is shipped with an extra motor module and motor housing top connector wrench. By simply removing the motor housing top connector and turning the motor module one-quarter turn, the worn motor module is easily removed and replaced allowing the user to continue with the sampling task at hand. Digital Low Flow Control at the Tip of Your Fingers! The Low Flow with Power Booster III LCD Controller is specifically engineered for use with the Stainless Steel Mega-Monsoon. The heavy-duty NEMA 4 enclosure incorporates a 30-amp reverse polarity protection circuit, current limitation circuitry, and thermal overload protection. The controller's Constant Voltage Regulation (CVR) Technology boosts the 12-volt power supply to 19 volts; supplying the Stainless Steel Mega-Monsoon with a constant 14 volts. This technology provides for the pump's high performance. The digital controller display allows you to fine tune the pump flow rate to as low as 10 ml per minute at any depth.       The Stainless Steel Mega-Monsoon System - Unprecedented 12-Volt Pump Performance! SS-Mega-Monsoon Pump Chart PUMPING DEPTH (DTW) GALLONS PER MINUTE 10 4.0 20 3.9 40 3.0 50 3.0 70 3.0 80 2.5 90 2.2 100 2.0 120 1.6 140 1.3 150 0.85 180 0.45 200 0.35 Specifications: Power consumption: 1100 WATTS (MAX) Volt recommendation: 12-15 at Source Maximum amp output: 42 Amps Measurements: Length 7.5" / Diameter: 1.82" Constructed: High Polished Stainless Steel Discharge outlet: 3/8" Male barb Supplied with: 210 feet of heavy duty PVC wire, metal reel with pump holder, Low flow power booster III LCD controller, spare motor module.