Falmouth FALCO Catalytic Oxidizers

The FALCO oxidizers are Factory Mutual approved electric catalytic oxidizer that treats air streams contaminated with volatile organic compounds. The catalyst provides VOC destruction efficiencies up to 99%. Startup is fully automatic. Controllers accurately regulate input loading and temperatures.

The controls adjust a FALCO Vapor Control Valve (VCV) to maintain safe maximum input concentration. Automatic shutdown results if temperatures exceed limits.

Discontinued

We no longer offer this product.

If available, alternative products will be listed below.

 

FALCO 100

FALCO 300

FALCO 600

Capacity

40 - 120 CFM

100-350 CFM

250-700 CFM

Max Input Loading

2,220 ppmv for petroleum hydrocarbons

250 lb/day petroleum hydrocarbons @ 350 cfm

500 lb/day petroleum hydrocarbons @ 700 cfm

Destruction Efficiency

99%

Up to 99.5%

Up to 99.5%

Catalyst Temperature Range

330-620ºC (626-1148ºF)

330-620ºC (626-1148ºF)

330-620ºC (626-1148ºF)

Catalyst

Monolithic. Precious metal

Packed bed 2.5 cubic feet. Precious metal on 1/8" ceramic beads is standard. Other catalysts are available.

Packed bed 5 cubic feet. Precious metal on 1/8" ceramic beads is standard. Other catalysts are available

Heat Exchanger

Stainless steel shell and tube. 67% efficient (adjustable)

Stainless steel Spiral plate. 73% Efficient at 300 scfm.

304 Stainless steel Spiral plate. 71% Efficient at 600 scfm.

Heater

30.5 amp @ 240 single phase (7.3 kW) Solid State control

56 amp @ 208 volts (20.3 kW) or, 64.6 amps @ 240V (27 kW) Solid State Control

75 amp @ 208 volts (27 kW) or, 86.7 amps @ 240 volts (36 kW) or,43 amps @480 volts (36 kW)

Weight

325 lb. Easily transported

825 lb.

1,400 lb. with flame arrestor.

Construction

304 stainless steel and aluminum

stainless steel and aluminum

304 stainless steel heat exchanger and vessel. Powder coated steel frame.

Dimensions

80" high X 50" long X 24" wide

73" high (excluding 5' stack) X 70" long X 29" wide Fits in the back of a pick up truck.

87" high (excluding 5' stack) X 78" long X 40" wide. Fits in the back of a pick up truck.

Power Requirements

7.3 kW, 240VAC 1 phase. Heater 30.5 amp, Controls 3 amp

3 phase 208-240 Volt, optional 1 phase 240 Volt

Heater-3 phase 208-240 Volt, optional 480 volts, Controls-120 Volts