New design combines PID lamp and sensor into a single, plug & play, self-cleaning VOC detector
Reliable and durable with a rubberized body
Simple to operate
AutoRAE – automated calibration with the push of a button
Built-in pump
Datalogging included - and automatic
Loud alarm (95Db at 30cm!)
Interchangeable Lithium-ion and alkaline battery packs
Charging cradle doubles as an external battery charger
Reliable, self-cleaning VOC detector
Also includes CO, H2S, LEL, and O2 sensors
Simple to operate and easy to calibrate
Datalogging included - and automatic
Bright red flashing LED alarms and loud audible alarms
Up to 16 hours of continuous operation
Charging cradle doubles as an external battery charger
Powerful pump allows sample-draws up to 100 feet (30 meters)
Low-flow pump alarm
_227.jpg) Refineries
Chemical processing
Water and Wastewater facilities
Semiconductor manufacturing
Rail car and tank truck cleaning
Resin and nylon production
Underground storage
Sewer entries
Cable vaults
Agriculture
| Gas |
Range |
Resolution |
Volatile Organic Compounds
|
0-999 ppm
|
1 ppm |
Combustible Gases
|
0-100% LEL
|
1% |
Oxygen
|
0-30.0%
|
0.1% |
Carbon Monoxide (CO)
|
0-500 ppm
|
1 ppm |
Hydrogen Sulfide (H2S)
|
0-100 ppm
|
1 ppm |
| Size: |
5.9”L x 3.3”W x 1.9"H (15 x 8.3 x 4.8 cm) without clip |
| Weight: |
20 oz (567 g) with battery and clip |
| Battery: |
Drop-in rechargeable Li-ion battery pack
Standard alkaline battery adapter
Charging cradle that doubles as an external battery charger |
| Operating Period: |
16 hours continuous with Li-ion (typical), 12 hours with alkaline |
| Display: |
Large 1.4” x 1.8” (3.5 x 4.5 cm) display with automatic back-lighting in
dim light or alarm condition |
| Keypad: |
Three-button operation |
Direct Readout:
|
Instantaneous for 5 values:
• Oxygen as percentage by volume
• Combustible gas as percentage of lower explosive limit (LEL), and
percentage by volume
• VOCs, CO and H2S as parts per million
• TWA and STEL values for VOCs, CO and H2S
• High and low values for all gases |
Alarms:
|
• Audible: 95 dB at 30 cm, visible, and vibration
• High: 3 beeps and flashes per second
• Low: 2 beeps and flashes per second
• STEL and TWA: 1 beep and flash per second
• Low battery displays empty battery symbol,1 beep per minute |
Calibration:
|
Two point field calibration; Auto-zero at start-up, user initiated span with
standard reference gas |
EMI/RFI:
|
Highly resistant to EMI / RFI. Compliant with EMC Directive 89/336/EEC |
IP-rating:
|
IP-55, protected against dust, protected against low pressure jets of
water from all directions |
Hazardous Area Approval:
|
UL: Classified as Intrinsically Safe for use in Class I, Division 1 Groups A,
B, C, D, Hazardous Locations T3C
Pending: ATEX, cUL |
Temperature:
|
-4 to 113 °F (-20 to 45 °C) |
Humidity:
|
0 - 95% relative humidity (non-condensing) |
Attachment:
|
Wrist strap, stainless steel alligator clip (installed), stainless steel belt
clip/hardhat adapter |
Warranty:
|
Lifetime on non-consuming components per RAE Standard Limited
Warranty
2 years for O2, LEL and CO, and H2S sensors
1 year for PID
1 year for pump and battery |
Monitor only includes
- Monitor
- Sensors
- Photoionization module (PID)
- Oxygen (O2) sensor
- Combustibles sensor (%LEL/%Vol)
-
Hydrogen Sulfide gas sensor (H2S)
- Carbon Monoxide gas sensor (CO)
- Lithium-ion rechargeable battery
- Alkaline battery adapter
- 5 external filters
- Charging cradle
- 120 V wall charger, US plug, or
- 230 V wall charger, Euro plug
- ProRAE Studio software package
- Computer interface cables
- RS232 with USB adapter
- User manual
- Shipping case
|
Accessories/Sensors
Truck Mount
CSK II
Charging station
Wall charging adapter, 120 V AC to 12 V DC
Wall charging adapter, 230 V AC to 12V DC, European plug
Re-chargeable Lithium-ion battery
4-gas calibration mix, 34 L aluminum cylinder (CH4, 20.9% O2, 10 ppm H2S, 50 ppm CO, bal N2)
Isobutylene, 34 L, 100 ppm (balance air)
PID module for VOC detection
Carbon Monoxide sensor
Hydrogen Sulfide sensor
%LEL / %Volume combustibles sensor
Oxygen Sensor, 2-year |
Optional Confined Space Kit II (CSK II) adds:
- Hard transport case with pre-cut foam
- Sampling wand with 15 feet (3 meters) of
self-coiling Teflon® tubing
- Tool Kit
- Four-gas mix – 34 L (50% LEL, 20.9% O2, 10 ppm
H2S, 50 ppm CO)
- Isobutylene – 34 L (100 ppm, balance air)
- Regulators and tubing
|
Optional AutoRAE Docking Station (Accessory) adds:
- Automated bump test and calibration system
- Drop-in push-button operation
Optional Truck Mount (Accessory) adds:
- Cradle attachment for mounting on a wall
- 12 V adapter
|
Optional Guaranteed Cost of Ownership adds:
- 4-year repair and replacement guarantee
- Annual maintenance service EntryRAE Monitors (PGM-3000)
|
|
