Sensor Specifications5 |
Range |
Resolution |
PID Sensors
VOC 10.6eV Lamp
VOC 9.8eV1 |
0 to 5000 ppm
0 to 1000 ppm |
0.1 ppm
0.1 ppm |
Combustible Sensors
Catalytic LEL
NDIR (0-100% LEL Methane)
NDIR (0-100% Vol. Methane) |
0 to 100% LEL
0 to 100% LEL
0 to 100% Vol. |
1% LEL
1% LEL
0.1% Vol. |
| Electrochemical Sensors |
| Carbon Dioxide (CO2) NDIR |
0 to 50,000 ppm |
100 ppm |
| Ammonia (NH3) |
0 to 100 ppm |
1 ppm |
Carbon Monoxide (CO)
|
0 to 500 ppm
|
1 ppm
|
| Carbon Monoxide (Ext. Range) |
0 to 2000 ppm |
10 ppm |
| Carbon Monoxide (H2 Comp) |
0 to 2000 ppm |
10 ppm |
Carbon Monoxide (CO) +
Hydrogen Sulfide ( H2S) combo |
0 to 500 ppm CO
0 to 200 ppm H2S |
1 ppm
0.1 ppm |
| Chlorine (Cl2) |
0 to 50 ppm |
0.1 ppm |
| Chlorine Dioxide (ClO2 |
0 to 1 ppm |
0.03 ppm |
Ethlyene Oxide (EtO-A)
|
0 to 100 ppm |
0.5 ppm |
| Ethylene Oxide (EtO-B) |
0 to 10 ppm |
0.1 ppm |
| Ethylene Oxide (EtO-C), Ext. Range |
0 to 500 ppm |
10 ppm |
| Formaldehyde (HCHO) |
0 to 10 ppm |
0.01 ppm |
| Hydrogen (H2) |
0 to 1,000 ppm |
2 ppm |
| Hydrogen Chloride (HCl) |
0 to 15 ppm |
1 ppm |
| Hydrogen Cyanide (HCN) |
0 to 50 ppm |
0.5 ppm |
| Hydrogen Fluoride (HF) |
0 to 10 ppm |
0.1 ppm |
| Hydrogen Sulfide (H2S) |
0 to 100 ppm |
0.1 ppm |
| Hydrogen Sulfide (H2S) ext. range |
0 to 1000 ppm |
1 ppm |
| Methyl Mercapatan (CH3-SH) |
0 to 10 ppm |
0.1 ppm |
| Nitric Oxide (NO) |
0 to 250 ppm |
0.5 ppm |
| Nitrogen Dioxide (NO2) |
0 to 20 ppm |
0.1 ppm |
| Oxygen (O2) |
0 to 30% Vol. |
0.1% Vol. |
| Phosgene (COCl2) |
0 to 1 ppm |
0.02 ppm |
| Phosphine (PH3) |
0 to 20 ppm |
0.1 ppm |
| Phosphine (PH3) ex. range |
0 to 1000 ppm |
1 ppm |
| Sulfur Dioxide (SO2) |
0 to 20 ppm |
0.1 ppm |
Size |
7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm) |
Weight |
31 oz. (880 g) |
Sensors |
Over 30 intelligent interchangeable field-replaceable sensors including PID for VOCs,
electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors,
and CO2 NDIR sensor |
Battery |
- Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time)
- Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time)
- Alkaline adapter with 4 x AA batteries (~6-hr. runtime) |
Displays |
Monochrome graphical LCD display (128 x 160) with backlighting. Automatic screen "flip" feature |
Keypads |
3 operation and programming keys (Mode, Y/+, and N/-) |
| Sampling |
Built-in pump or diffusion |
| Calibration |
Automatic with AutoRAE 2 Test and Calibration System1 or manual |
| Datalogging |
- Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7)
- User-configurable datalogging intervals (from 1 to 3,600 seconds) |
Communication and
Data Download |
- Data download and instrument set-up and upgrades on PC via charging and PC comm. cradle,
travel charger, or AutoRAE 2 Automated Test and Calibration System1
- Wireless data and alarm status transmission via built-in RF modem (optional) |
| Wireless Network |
RAE Systems Dedicated Wireless Network |
| Wireless Frequency |
ISM license-free bands |
| Wireless Range (Typical) |
656 feet (200 meters) |
| Operating Temperature |
-4° to 122°F (-20° to 50°C) |
| Humidity |
0% to 95% relative humidity (non-condensing) |
| Dust and Water Resistance |
IP-65 (pumped); IP-67 (diffusion) |
Direct Readout |
- Real-time reading of gas concentrations; PID measurement gas and correction
factor; battery status; datalogging on/off; wireless on/off and reception quality.
- STEL, TWA, peak, and minimum values |
Alarms |
Wireless remote alarm notification; multi-tone audible (95 dB @ 30 cm), vibration, visible
(flashing bright red LEDs), and on-screen indication of alarm conditions
- Man Down Alarm with pre-alarm and real-time remote wireless notification |
| Hazardous Location Approvals |
CSA: Class I, Division 1, Groups A, B, C and D, T4
ATEX: II 2G Ex ia d IIC T4 Gb
IECEx: Ex ia d IIC T4 Gb |
| CE Compliance (European Conformity) |
EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC. ATEX directive: 94/9/EC |
| EMI/RF |
No effect when exposed to 0.43mW/cm2 RF interference from a 5-watt transmitter at 12" |
| Performance Tests |
LEL CSA C22.2 No. 152; ISA-12.13.01 |
| Languages |
Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian,
Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, and Swedish |
| Warranty |
- Two years on non-consumable components and catalytic LEL, CO, H2S, and O2 sensors
- One year on all other sensors, pump, battery, and other consumable parts |
| Notes |
1 Contact RAE Systems for availability.
2 RAE Systems recommends calibrating sensors on installation.
3 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission.
4 The CO + H2S combo sensor is required for a 6-gas configuration.
5 Specifications are subject to change. |
