The Protimeter Moisture Measurement System (MMS) Plus is a complete moisture measurement device for use in many different building related industries.

The MMS combines pin type and non-invasive modes of measurement together and a thermo-hygrometer with data storage in one state-of-the-art instrument.

The MMS Plus incorporates grains per pound calculation; important when monitoring the drying out of buildings.

The MMS Plus is also standard with data download software and a cable for capturing and downloading up to 1000 results to a PC.

The instrument is compact and simple to use, having a large liquid crystal display and a cluster of just four buttons for selecting the operational modes. It is supplied in a nylon carry case with zipper together with the necessary accessories for a complete moisture survey.

When used as a moisture meter, the MMS Plus has two operational modes known as Search and Measure. By selecting Search mode and holding the instrument against building materials such as walls, the user obtains a qualitative indication of the moisture level beneath the surface or under a floor covering.

By selecting Measure mode and using the standard pin or 5” deep wall probes, the user is able to gather further information at the surface and up to 5” in depth below the surface.

The MMS can be used as a hygrometer to measure relative humidity, ambient temperature and dew point. In this way the moisture condition of domestic and commercial environments can be assessed and compared.

The Hygrostick® sensor that is supplied with the instrument can also be embedded in solid floors and walls to obtain a material’s equilibrium relative humidity (ERH) value. This technique has been widely adopted by the flooring industry (ASTM Standard F-2170-02) to establish if concret floors have dried sufficiently prior to laying a floor covering.

For assessing the risk, or confirming the presence of condensation on surfaces, the MMS is used in Condensation mode. When the Surface Temperature Sensor is connected and held against a surface, the MMS displays the difference between the surface’s temperature and the dew point together with text messages that confirm whether or not condensation is occurring.

Applications (3-in-1 Moisture Measurement System)

	Measure Moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry, and other building materials. Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of building structures. Use deep wall pin type probes to measure moisture in walls, wall cavity insulation, sub and surface structures.
	Search Behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block. Non-invasive pinless radio frequency finds moisture up to 3/4" below surface. Search mode not adversely affected by surface moisture.
	Hygrometry Checks the dehumidification process, monitors buildings for adequate ventilation affecting indoor air quality Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dewpoint (condensation) and grains per pound. Use to detect conditions for mold and fungus growth which can lead to unhealthy living conditions.

Specifications:

Includes as Standard		MMS Plus includes instrument with grains / lb automatic calculation, data download software with cable, Hygrostick, surface temperature sensor, 5" deepwall probes, pin moisture probe, Hygrostick extension lead, wood calibration chart, calibration check device, spare pins, instructions, nylon pouch
Gross Weight		10.58 oz. (300 g) instrument only. 2.5 lb. complete kit
Dimensions		(LxWxH) 7 x 2.75 x 1.9" (180 x 70 x 49 mm)
Max. Needle Depth		0.4" (10 mm)
Display		LCD
Batteries (included)		2 AA batteries
Measurement Range Pin (% WME)		6 - 99
Non-Invasive (RF) up to 1" (25.4 mm) deep		0-1000 (relative)
Hygrostick (RH) Nominal		20 - 100% RH, 32° - 122°F (0°- 50°C)
Temp. Probe Range Nominal		15°- 120°F (-10° - 50°C)
Hygrostick Data 30 - 40% RH 41 - 98% 0.5°- 122° F (-18°- 50°C)		Nominal ±2.5% RH ±1.75% RH ±0.6°F (0.3°C)
Low Range RH Sensor Optional MMS Plus Only		Nominal 0 - 40% RH ±2.0% , Temp. 32°-104°F ±0.6°(0-40°C ±0.3°)
Data Storage		Store up to 1,000 results with date and time stamp from all instrument functions

Accessories

		BLD5010 Hammer Electrode Telescopic measures moisture to a depth of 1.38" (35mm). Adjustable depth - stop. Wt. 7 oz. (0.2 kg)
		BLD5000 Hammer Electrode measures moisture to a depth of 1.38" (35mm). Wt. 31.75 oz. (0.9 kg)
		BLD5020 Deep Wall Probe measures moisture at depth in walls and and other structures. Length: 9" (230mm)
No Image available		BLD4902 Humidity Sleeves 20 pack. Measurement of RH in concrete slabs. ASTM F2120
		BLD4750C Hygrostick 5 pack standard 5 pack 4 pt. calibration. Traceable calibration certificate available.
No Image Available		BLD5812 Low Range RH Sensor Designed for accurate measurement for low % RH Dehumidifiers. 0 - 40% range.